Post by chrissullivan on Nov 25, 2009 19:21:10 GMT -6
355 HP @ 5250 RPM
405 ft/lbs TQ @ 3500 RPM (Max Recommended RPM: 5800)
10.1:1 Compression Ratio
Cast Iron 4-Bolt Block with One-Piece Rear Main Seal
Forged Steel Crankshaft
High-Silicon Aluminum Pistons with Offset Pins
PM Connecting Rods
Aluminum Angle Plug 58cc Cylinder Heads (1.94" Int/1.50" Exh valves)
Steel Hydraulic Roller Cam (Lift: .474" Int/.510" Exh, Duration @ .050": 208° Int/221° Exh)
1.5 Ratio Rocker Arms
Aluminum Dual Plane Intake Manifold
HEI Distributor
8" Torsional Damper
Cast Iron Water Pump
12.75" Flexplate
*Carb, spark plug wires, starter, oil filter and adapter not included
Bought new 3 years ago and never removed from original crate. Has been stored in climate controlled garage.
$4,000
Chris Sullivan
(217)899-2143
405 ft/lbs TQ @ 3500 RPM (Max Recommended RPM: 5800)
10.1:1 Compression Ratio
Cast Iron 4-Bolt Block with One-Piece Rear Main Seal
Forged Steel Crankshaft
High-Silicon Aluminum Pistons with Offset Pins
PM Connecting Rods
Aluminum Angle Plug 58cc Cylinder Heads (1.94" Int/1.50" Exh valves)
Steel Hydraulic Roller Cam (Lift: .474" Int/.510" Exh, Duration @ .050": 208° Int/221° Exh)
1.5 Ratio Rocker Arms
Aluminum Dual Plane Intake Manifold
HEI Distributor
8" Torsional Damper
Cast Iron Water Pump
12.75" Flexplate
*Carb, spark plug wires, starter, oil filter and adapter not included
Bought new 3 years ago and never removed from original crate. Has been stored in climate controlled garage.
$4,000
Chris Sullivan
(217)899-2143